Setting spool pins, Thread cutter, Accessory box – Sears 38512102 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Spool Pins
<3)
Spool pin
The spool pins are used for holding the spools of
thread when feeding thread to the machine.
To use, puli up the spool pins. Push down for storage.
r
..............J
Presser Foot Lifter
©Presser foot lifter
@ Normal up position
(D Highest position
The presser foot lifter raises and lowers your presser foot.
You can raise it about 1/4” (0.6 cm) higher than the
normal up position for easy removal of the presser foot
or to help you place heavy fabric under the foot.
Thread Cutter
® Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Just use the built-in thread cutter.
Accessory Box
Sewing accessories are conveniently focated In the box.
8