Inserting the bobbin, Ma j – Sears 38512102 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• Inserting the bobbin
|T)
Place a
bobbin in the bobbin case maidng
sure
thread feeds clockwise coming from the bobbin.
Draw the thread through the slot of case.
I Continue to draw the thread under the tension spring and
through the opening.
Pull out about 4" (10 cm) of thread.
f
N
>
>
J
[3 Holding latch open, position the bobbir* «rase into the
shuttle and release latch.
f
JM
J
[Q Case should lock into place when latch Is released.
—
A
mA
J
20
Advertising