Section v. buttonhole, Butionliole – Sears 38512102 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION V. BUTTONHOLE
Butionliole
(D Needle positions selector diai; CD
@ Stitch length dial;
0.6 to 1
(D Stitch width dial:
0 to 5
0 Needle thread tension:
1 to 4
Stitch width dial setting: (A) Set the dial at "2" for line-tack
I (B) I
(B) Set the dial at “S'* for bar-tack
—>1
(Bar-tack)
m Pull 6" (15 cm) of both threads to the side and under
the presserfoot.
0 Needle thread
<D Bobbin thread
Set the stitch length dial at “0” and the stitch width dial
at “5”.
m Lower the needle at the starting position, and lower the
presser foot. Sew 5 stKches for the bar-tack, then stop
the machine with the needle in the left position.
(D Stitch length dial: 0
0 Stftch width dial: S
0 Starling position
(Line-tack)
m Set the stitch length dial at "0.5'' and stitch width dial
at “2",
0 Stitch length dial: 0.5
® Stitch width dial:
2
in Sew the line-tack stitch for the desired length.
48