Sears 38512102 - Manual (Page 40)

Topstitching
Needle positions selector dial:
(D Stitch length dial: 2 to 4
(1) StHch width dial: 0
@ Needle thread tension: 2 to 6
NOTE: When using the straight stitch foot, make sure to set
the needle positions selector at CO {Center needle
position) and sfrtch width at “0”. Otherwise the needle
may strike the sewing foot and possibly break.
Topstitching emphasizes lines of garments and keeps seams
and edges flat and crisp. Accent suits or blouses with one or
two rows of topstitching around the oirter edges of cuffs,
lapels or collars. Lower the presser foot and keep the edge
of the fabric next to the right edge of the presser foot.
Evenly guide the fabric along the edge to produce an even
row of topstitching 3/8” (1 cm) from the edge.
Zipper Sewing (optional)
<T) Needle positions selector dial: CE>
(D Stitch length dial: 2
® Stitch width dial: 0
<|) Needle thread tension: 2 to 6
(D Presser foot: 21ipper foot
* Fabric preparation
<D Right side of fabric
@ End of opening
Piece right sides of fabric together and sew to the end of the
zipper opening.
Reverse stitch to lock the stitches, increase stitch length
and set needle thread tension at 0. Sew the zipper opening
with the basting stitch.
32