Adjust the needle thread tension for zigzag stitch, Correct tension, Tension is too tight – Sears 38512102 User Manual
Page 34: Tension is too loose
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjust the Needle Thread Tension for Zigzag
Stitch
For an ideal zigzag stitch, the bobbin thread does not show
on the right side (top side) of the fabric and needle thread shows
slightly on the wrong side (bottom side).
CiWw *riw 111и1о11ЙХ10Г|3 ТОГ C
ia
3FTCCT 9|ЗрвЯТЗГЮв*
To match this appearance, adjust the needle tension.
»Correct tension
(D Right side (Top side) of fabric
<D Wrong side (Bottom side) of fabric
Minimize amount of needle thread visible on the vwong
side (bottom side) of fabric without causing excessive
puckering or causing bobbin thread to show on the right
side (top side) of fabric.
Results vary with fabric, thread and sewing condition.
«Tension is too tight
(T) Right side (Top side) of fabric
(D Wrong side (Bottom side) of fabric
Corner of each zigzag pulls together on the right
wL LCtLI! iL>..
• tension is too loose
0 Right side (Top side) of fabric
(f) Wrong side (Bottom side) of fabric
The needle thread loops through wrong side (bottom side)
of fabric and is pulled almost together.
OA