Oiling the machine, Oil behind the face cover, Oil the shuttle area – Sears 38512102 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oiling the Machine
Oil the points as shown at least once a year
Use good quality sewing machine oil.
One or two drops of oil is sufficient. Remove excess oil,
otherwise it may slain fabric.
In case machine is not used for an extended time, oil it
before sewing,
NOTE: Turn off the power switch or unplug the machine
before oiling.
• Oil behind the face cover
© Cap
<g) Screw
© Face cover plate
Remove the cap, screw and face plate. Oi! the points
indicated in the illustration.
® Oil the shuttle area
(D Shuttle cover
Open the shuttle cover by pulling down the embossed part on
the left side of the cover
Oil the points as indicated in the iliustratlon.
56