SINGER 814 Stylist User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BOBBINS
Transparent drop-in bobbin,
#
172336,
shows thread supply at a glance.
NEEDLES
® Style # 2020 needles for all-purpose
sewing.
® Style
#
2045 ball-point (yellow band)
needle for sewing knits and stretch
fabrics.
® Style
#
2025 twin needle for decor
ative twin-needle stitching.
ilVlPORTANT:
Your SINGER sewing
machine has been designed to obtain
best resuits with SiNGER nee dies. You
should follow the recommendations in
this instruction book and on the needie
package for correct style and size of needle
for different types and weights of fabrics.
CHANGING THE NEEDLE
The needle clamp is designed so that the
needle can only be inserted with the flat
side of the needle to the back. To change
the needle:
1. Raise needle bar to its highest position,
loosen needle-clamp screw, and re
move needle.
2. Insert new needle in clamp, with the
flat side of the needle to the back;
push it up as far as it will go.
3. Tighten needle-clamp screw.
SPOOL HOLDERS
The spool holders hold spools of various
sizes in position on the horizontal spool
pin. Because the spool does not turn,
thread unwinds without tug or drag.
DETACHABLE SPOOL PIN
The secondary detachable spool pin is
used for twin-needle stitching.
Transparent
Bobbin
Regular Needle
V V
Twin Needle
Ball-point
(Yellow Band) Needle
Small and Large
Spool Holders
Detachable
Spool Pin