SINGER 814 Stylist User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FLEXI-STITCH

PATTERNS (Continued)

To produce a

Flexi-Stitch

pattern, the

stitch width selector must be moved from
the straight-stitch setting i to a setting

from ^ to ^. Stitch width is increased

as the dial is moved to the right.
On setting i all width is removed from

Flexi-Stitch'

patterns and the straight

stretch stitch is produced.

ADJUSTING WIDTH OF DESIGN

Adjusting Width of Design

Only

Setting

Only

ADJUSTING STITCH PLACEMENT

Fiexi-Stitch

patterns can be sewn in

either ¿^(left), X (center) or J (right)

needle positions. Center needle position

X is recommended.

Adjusting Stitch Placement

Adjusting Needle-Thread Tension

ADJUSTING
TENSION

NEEDLE-THREAD

Some

Fiexi-Stitch

patterns require more

needle-thread tension than others. Make

a test sample with the fabric, thread and

presser foot you plan to use so that you

can adjust tension to suit the stitch you
have chosen.

For your test sample, set the tension dial

on 3 or 4. Notice the stitching; if the fabric
puckers, decrease tension by turning the

dial to a lower number. Sew at moderate
speed.

Before moving needle position and stitch

width selectors make sure needle is above

fabric and the stitch length dial is OFF
buttonhole settings.

30

Advertising
This manual is related to the following products:

814