SINGER 814 Stylist - Manual (Page 33)

When you use a Flexi-Stitch pattern,
stitch length is controlled with a single
setting of the stitch length dial. No further
adjustment should be made.
To set turn dial until red bar ■ is centered
under the arrowhead T on the control
panel.
NOTE: Stitching cannot be reversed when
the Flexi-Stitch pattern dial is on red
Fiexi-Stitch setting.
SETTING STITCH LENGTH DIAL
Red Bar
ADJUSTING STITCH BALANCE
You may need to adjust the Fiexi-Stitch
pattern dial when using a Fiexi-Stitch
pattern in order to achieve the correct
pattern appearance. Before you move the
Fiexi-Stitch pattern dial from its neutral
position (red bar | centered under W ).
make a test sample. If adjustment is
required, stitch slowly and move the
control dial as you sew.
® Turn the dial to the right to bring
stitches of the pattern together.
• Turn the dial to the left to separate
stitches of the pattern.
Stitch Length Dial
Incorrect Correct
Turn Dial to Right to Bring
Stitches Together
Incorrect Correct
N
ADJUSTING PRESSURE AND
CHOOSING ACCESSORIES
Turn to page 19 under "StraightStitching"
for instructions on adjusting pressure.
For information on choosing accessories
refer to detailed instructions for sewing
with Fiexi-Stitch patterns included in the
section called "Sewing the Professional
Way", which starts on page 38.
Turn Dial to Left to
Separate Stitches
Adjusting Stitch Balance
31