SINGER 814 Stylist User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Seam Guide No. 161172 helps keep
seam width uniform when extra control is
needed, especially on unusually wide or
narrow seams. Used as a guide for top-
stitching and blindstitch hemming.
Edgestitcher No.
36865,
used with the
straight stitch setting, is ideal for joining
and inserting lace, tucking from pin width
up to 1/4 inch (6 mm), French seaming
and seam piping, facing, and seam
finishing.
Gathering Foot No. 161659 can be
used for evenly spaced shirring as well as
for a single line of gathering. This foot is
used for straight stitching only.
Hemmer Foot No. 161671 is used for
turning and stitching narrow hems in one
operation. Thus, you can eliminate bast
ing or pinning whenever you are making
ruffle edges, lingerie finishes, and the
like.
Hemmer
Foot
Darning and Embroidery Foot No.
161876 is recommended for all types of
free-motion work. It is ideal for em
broidery, monogramming and decorative
designs because the transparent toe fully
reveals the line of the design to be
followed.
Darning and Embroidery Foot
63