SINGER 814 Stylist User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCHING (Continued)
TURNING SQUARE CORNERS
To turn a square corner 5/8 inch (1.5 cm)
from the, fabric edge, you need not
measure or mark the seam. Simply use the
crosslines on the slide plate.
® Line up your fabric with right or left
guideline 5 on the needle plate. Stitch
seam, slowing speed as you approach
corner.
® Stop stitching, with the needle down,
when the bottom edge of the fabric
reaches the cornering crosslines on the
slide plate.
® Raise presser foot and turn fabric on
needle, bringing bottom edge of fabric
in line with guideline 5.
® Lower the presser foot and stitch in
new direction.
Pivoting at Corner
PIN
BASTING
Pin basting is a time-saver and can be
used when you sew easy-to-handle
fabric. Use fine pinsand place them:
® On top of the fabric (never on the
underside in contact with the feed).
® Atrightanglestothestitching line.
® Just nipping into the fabric at the
stitching line (never extending under
both sides of the presser foot).
22