SINGER 814 Stylist User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING
THE BOBBIN CASE
1. Open slide plate. Hold bobbin so that
thread unwinds in direction shown, and
put bobbin in bobbin case.
2. Pull thread into notch, draw it under
tension spring and back into slot.
3. Draw about three inches of thread
diagonally across the bobbin.
4. Close slide plate allowing thread to
enter slot between the needle plate and
slide plate.
14
Advertising
This manual is related to the following products: