Cleaning the machine – SINGER 814 Stylist User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
cleaning the machine
Your machine will serve you perfectly for many years if you take a few
moments of your time to keep it clean. How often you will need to clean the
machine will depend on how often you use It.
CAUTION: Before cleaning your macliine. disconnect power-fine
plug from electrical supply.
Remove lint or fluff from exposed parts.
With a soft cloth, clean:
® Tension discs, take-up lever, and
thread guides.
® Presser bar and needle bar.
• Bobbin case. (If there is an excessive
amount of lint in the area, remove the
bobbin case for cleaning. See page 58
for instructions.)
• Machine surface. (If necessary, dampen
the cloth and use a mild soap.)
Remove face plate as instructed on page
58 and clean area behind it with a lint
brushf.
Remove needle plate as instructed on
page 8 and, using a brush, clean the
rotating hook area under the needle plate
and slide plate.
Clean between
tension discs
Clean
NOTE: Your machine requires
no oiling
under normal conditions. Your SINGER
representative, or Approved Dealer will
examine the permanently lubricated parts
whenever your sewing machine requires
servicing.
fA lint brush designed for this purpose is available
for separate purchase atyour local Singer Sewing
Center.
Clean
Clean