SINGER 814 Stylist User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
RAISING THE BOBBIN THREAD
Now that you have wound the bobbin and
threaded the needle, you will need to raise
the bobbin thread through the needle hole
in the needle plate.
1. Hold needle thread lightly with left
hand and turn hand wheel slowly
toward you so that needle enters hole
in needle plate.
2. Continue turning hand wheel and hold
ing needle thread until needle rises.
Tighten your hold on the needle thread
and bring up bobbin thread in a loop.
3. Open the loop with your fingers.
4. Place both needle and bobbin threads
under presser foot, and draw to back of
machine.
. . . You are now ready to sew
16
Advertising
This manual is related to the following products: