Threading your sewing machine – SINGER 814 Stylist User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
threading your
sewing machine
Like all sewing nnachines that produce
what is called a "lockstitch”, your
Stylist
sewing machine sews with two threads.
The upper thread comes from the spool
and is threaded through the eye of the
needle. The lower thread comes from the
bobbin, the small transparent spool that
you wind using the machine. It is best to
wind the bobbin before threading the
needle.
Spool Holders
for Bobbin Winding
THE SPOOL HOLDER
® Remove spool holder from spindle by
sliding it to the left.
® Place spool of thread on horizontal
spool pin. If spool being used has a
retaining slit, this should be placed
against the spool cushion on the right.
® Select correct spool holder according
to type and diameter of the end of the
spool being used. The diameter of the
end of the spool holder should always
be largerthan that of the spool itself.
* Press spool holder
firmly
against spool.
THE BOBBfIM THREAD
Winding the Bobbin
® Press hand wheel disc at bobbin
symbol
© Open slide plate. Draw plate toward
you to make bobbin accessible.
© Lift out the bobbin and close slide plate
to make sure needle plate is secure
while winding.
12