And what they do, Spool holderto tension discs, Flexi-stitch – SINGER 814 Stylist User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
and what they do
1.
Bobbin-Winder
Tensiori
Disc
regulates
thread
tension
for
bobbin
winding.
2.
Pressure Dial regulates presser-foot pressure on fabric. It has an all
purpose setting plus settings for extra-light and extra-heavy pressure,
andfordarning.
3»
Take-up
Lever controls flow of needle thread.
4„ Presser-Foot Lifter^ at back of machine, allows you to raise and
lower presser foot. High-lift position allows easy placement of bulky
fabrics.
5. Thread Cutter is built into presser bar for safety and convenience.
6= Weedie Clamp holds single and twin needles and is designed to
eliminate the possibility of inserting needle backwards.
7o Presser Foot holds fabric against feed. The feet snap off for quick
removal.
8. lyeedle Plate lifts out for easy removal. Guidelines on right
and
left
sides extend to slide plate to help you keep seams straight.
B,
Feed moves fabric under the presser foot.
10« Slide Plate opens for easy removal and replacement of the bobbin, and
raises and lowers the pin that holds the needle plate in place.
11.
Sewing Light illuminatesthesewing area.
12.
Flexi-Stitch
Pattern Dial sets the machine for
Flexi-Stitch
pattern
sewing and varies the balance of
Flexi-Stitch
patterns in order to obtain
desired pattern appearance.
Dial must be set in 0 (off) position when notin use.
13.
Hand
Wheel
positions
take-up
lever
and
needle.
Always
turn
it
toward you.
14.
Bobbin Winder lets
you
fill the bobbin with thread quickly and easily.
15.
Spool Holder with Horizontal Pin holds thread spools of various
sizes. Holder lets thread unwind without tug or drag.
16.
Snap-in Thread Guide Post provides smooth flow of thread from
spool holderto tension discs.