SINGER 814 Stylist User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE NEEDLE THREAD
Leadlhread
under nqhX
Left
Guide
Allow spring to return to its
normal up position and con
tinue threading the machine
Threading the Needle
1. Turn hand wheel to raise take-up lever
to its highest position,
and raise presser
foot to release the tension discs.
2. Place spool of thread on spool holder
and lead thread through all points as
shown, making sure to:
® Hold thread as illustrated while guiding
thread into tension discs.
® Thread tension discs as illustrated.
® Thread take-up lever from back to front,
guiding thread down over top of lever
and then up into eyelet.
® Thread needle from front to back,
drawing about four inches (10 cms) of
thread through eye of needle.