SINGER 814 Stylist User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
if stitching is irregular, or needle thread breaks, make sure . . .
@
Ffexi-St/tch
pattern dial is set at O when straight or zig-zag stitching.
®
flexi-Stitch
pattern dial is balanced when sewing
Flexi-Stitch
patterns.
® Machine is correctly threaded
® Thread is even and free from knots.
© Needle is straight and sharp and right size for thread.
® Needle-thread tension is not too tight.
® Bobbin case is correctly threaded and properly inserted.
© Threads are correctly placed under presser foot when you start to sew.
® Bobbin case area is free of lint and loose thread ends.
® Bobbin or bobbin case is not damaged.
Also remember to . . »
© Turn hand wheel toward you to position needleand take-up lever.
© Raise needle above fabric before making adjustments to stitch width and
needle position.
® Use red selector settings for
Flexi-Stitch
pattern sewing.
® Turn
Flexi-Stitch
pattern dial to O when making buttonholes.
© Start and finish sewing with take-up lever in its highest position.
® Adjust stitch length, pressure, and thread tension to suit your fabric.
© Test stitch on a fabric sample before starting a sewing job.
® Lower presser foot before setting pressure dial.
® Press hand wheel disc for sewing and disengage bobbin winder after
winding a bobbin.
® Remove feed-cover needle plate after button sewing and after darning
with an embroidery hoop.
® Sew at a moderate speed when using a
Flexi-Stitch
pattern.
® Clean your machine periodically.
E n j o y S e w i n g !
If you have any questions, please write to:
Consumer Affairs Department
The Singer Company
321 First Street, Elizabeth, I\lJ. 07207
61