Getting ready to sew, Steps – SINGER 513 Stylist User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GETTING READY TO SEW
Before plugging in your machine, be sure
that the voltage and number of cycles
indicated on the plate under the hand
wheel conform to your electrical power
Push the machine plug into the receptacle
at the right end of the machine bed. Then
connect the power-line plug to your
OPERÄTIWG MACHIWE AMD
To turns on both machine and sewing
light, press power and light switch to ON
position (red bar on switch vi/ill be visible).
'To turn off machine and light, press
switch at red bar to OFF position.
When leaving the machine
unattended or before changing needies,
presser feet and needle plates, turn off
the power and light switch and dis
connect the power-line plug from the
electrical supply socket.
This eliminates the possibility of oper
ating the machine by accidentally press
ing the speed controller.
To run the machine, press the speed
controller. The harder you press, the faster
the machine will sew.
To stop the machine from sewing,
remove pressure from speed controller.
Power and Light Switch