SINGER 513 Stylist User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before moving needle position and stitch
width selectors make sure needle is above
fabric.
To produce a Flexi-Stitch pattern, the
stitch width selector must be moved from
the straight-stitch setting j , to a setting
from I to j . Stitch
Width
Is increased
as the selector is moved to the right.
ADJUSTING STITCH PLACEMENT
flexFStitch patterns can be sewn In either
L (left), X (center) or J (right)
needle positions. Center needle position
X is recommended.
ADJUSTING NEEDLE-THREAD
Make a test sample with the fabric, thread,
and presser foot you plan to use so that
you can adjust tension to suit the stitch
pattern you have chosen.
For your test sample, set the tension dial
on 3 or 4. Notice the stitching; if the
fabric puckers, decrease tension by turn
ing the dial to a lower number. Sew at
moderatespeed.
Adjusting Width of Design
Special'
Stitch
Placement
Only
■ \
Special
Stitch
Placement
Only
Most Used
Setting
Adjusting Stitch Placement
Incorrect
Correct
Adjusting Needle-Thread Tension
27