Threading for twin-needle stitching – SINGER 513 Stylist User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use SINGER*^' Twin Needle Style# 2028 (size 14)
iWSERTiWG THE TWiW WEEDLE
Before inserting the twin needle, make
sure that the needle position selector is
set at L
stitch width
does not exceed the settings shown on
page 29.
To insert the twin needle, simply raise
needle to highest point and loosen the
needle-clamp
screw.
Remove
single
needle and insert the twin needle in its
place.
Tighten
needle-clamp
screw
securely.
threading for twin-needle stitching
For best results, use No. 50 mercerized cotton thread.
Thread the machine in the same manner as for single-needle stitching
except :
1. Be sure that threads are separated by center tension disc as they pass
around tension assembly.
2. Carry only one thread through the last guide before the needle.
TWIN NEEDLE STITCHING (Continued)
30