SINGER 513 Stylist User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
RAiSiÍ\lG THE BOBBiW THREAD
Mow thaï you have wound the bobbin and
threaded the needle, you will need to
raise the bobbin thread through the needle
hole in the needle plate.
1. Hold needle thread lightly with left
hand and turn hand wheel slowly
toward you so that needle enters hole
in needle plate.
Continue turning hand wheel and
holding needle thread until needle
rises. Tighten your hold on the needle
thread and bring up bobbin thread in a
loop.
3. Open the loop with your fingers.
4. Place both needle and bobbin threads
under presser foot, and draw to back
of machine.
Í
X.
j
are now ready to sew
15
Advertising