Straight stitching, Stitch width selector, Needle position selector – SINGER 2517 Merritt User Manual
Page 40: Stitch lenght selector, C=> db cd, Singer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SINGER
Straight stitching
Stitch width selector
Before you move the selectors to set your machine for
straight stiching, turn the hand wheel toward you until
needle is at its highest point.
Straight stitching for stitch width lever must be set
at ( j ) only.
Needle position selector
Needle Position Selector positions the needle in left
(
¿3
), center ( ct ) or right ( J ) needle positions.
Stitch lenght selector
To adjust the lenght of your stitches, turn the dial so that
desired stitch length is positioned under (
•
) symbol.
® To shorten stitch lenght, turn dial toward a lower
number.
* To lengthen stitch length, turn dial toward a higher
number.
® For fine stitching set length to 1.5.
® For gathering set length to 5. Draw bobbin thread to
gather.
1--------
2 AAAAA
3 AAAM
4/WW\
5/WW\
•
•
•
1
2
3
J
c=> db cd
J
38