Buttonholes – SINGER 2517 Merritt User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Stitch width: (See illustration)
Needle position: t i ci
Stitch length: between 0 and 1
Note: For best results use the buttonhole foot available
for purchase at your local Sewing Center.
Side Stitching: Position needle in fabric at point A.
Lower foot and stitch to end of marking. Leave needle
in fabric at point B. Raise foot and pivot work on
needle. Lower foot. Take one stitch without changing
width setting, bringing work to point C.
2. Bar Tack: Adjust stitch width selector for bar tacks and
take at least six stitches. Stop at point D.
Side Stitching:Readjust stitch width selector for side
stitching. Complete work to point E. Leave needle in
Final Bar Tack: Adjust stitch width selector for bar
tacks, and take at least six stitches ending at point F.