ADLINK ND-6018 - Manual (Page 25)

Introduction • 17
1.6 Overview of NuDAM-6017
What is NuDAM-6017 ?
NuDAM-6017 is an analog input module with 8 input channels. Six of
the eight channels are differential type and the other two are single
ended type.
Features of NuDAM-6017
• 8 analog input channels
• 6 differential inputs and 2 single ended inputs
• Programmable input voltage range
• Programmable host watchdog timer for host failure protection
• 5000 Vrms isolation voltage
• Internal watchdog timer for device failure protection
• Easy programming by software
• Easy installation and wiring
Specifications of NuDAM-6017
— Interface
• Interface: RS-485, 2 wires
• Speed (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K ,115.2K
(115.2K only for firmware reversion above A4.00)
— Analog Input
(4)
• Input type: Differential input
• Channels Numbers: 8
• Resolution: 16 bits
• Unit Conversion: mV, V, or mA
• Voltage Range: Programmable 5 levels , ±10V, ±5V, ±1V,
±500mV, ±150mV
• Current Measurement: ±20mA (with external 125Ω resistor)
• Accuracy: ±0.1%
— Power
• Power supply: +10V to +30V
• Current consumption: 1.2 W
Note (4) : The maximum input voltage shall not exceed to ±30V with reference to
AGND otherwise, they may cause an unrecoverable harm to the hardware
component.