ADLINK ND-6018 - Manual (Page 72)

64 • Command Set
3.27 Read enable/Disable Linear Mapping Status
@Description
Read enable or disable the linear mapping status for the module.
@Syntax
$(Addr)R<CR>
$ Command leading code.
(Addr) Address ID
R Read to the linear mapping status.
@Response
!(Addr)(Status)<CR>
or
?(Addr)<CR>
! Command is invalid.
(Addr) Address ID.
(Status) One char to means the state of linear mapping.
1: means enable.
0: means disable.
? Command is invalid.
@Example
User command: $07R<CR>
Response: !070<CR>
This command means the linear mapping function of ND-6014D is
disable, and the address of this module is 07H.
(6014D)