ADLINK ND-6018 - Manual (Page 50)

42 • Command Set
3.5 Read Module Name
@Description
Read module name of NuDAM at specified address.
@Syntax
$(Addr)M<CR>
$ Command leading code.
(Addr) Address ID
M Read module name
@Response
!(Addr)(ModuleName)
<CR>
or
?(Addr)<CR
>
! Command is invalid.
? Command is invalid.
(Addr) Address ID.
(ModuleName) NuDAM module‘s name could be
‘6011’, ’6011/D‘, ‘6012’, ’6012/D‘, ‘6013’, ‘6017’
or ’6018‘.
4 or 5 characters
@Example
User command: $30M<CR>
Response: !306011/D<CR>
! Command is valid.
30 Address
6011/D ND-6011/D (Analog Input Module)
(6011/D, 6012/D, 6013
6014D, 6017, 6018)