ADLINK ND-6018 - Manual (Page 52)

44 • Command Set
3.7 Software Reset
@Description
To stop current operation , reset the module to initial power on state.
@Syntax
$(Addr)RS<CR>
$ Command leading code (1 character)
(Addr) Address ID (2 character)
RS Software Reset (2 character)
@Response
!(Addr)<CR>
or
?(Addr)<CR
>
! Command is valid.
? Command is invalid.
(Addr
) Address ID.
@Example
User
command: $060RS<CR>
Response: !06<CR>
To stop current operation , reset the module to initial power on state for
analog input module ND-6013 , address ID is 06H.
(6011/D, 6012/D, 6013
6014D, 6017, 6018)