ADLINK ND-6024 - Manual (Page 18)

12 • Initialization & Installation
2
Initialization & Installation
2.1 Software Installation
1. If you have already installed “NuDAM Administration” then skip other
steps.
2. Backup your software diskette.
3. Insert “NuDAM Administration” diskette into floppy drive A:
4. Change drive to A:
5. Installation command syntax
INSTALL drive:
drive name is C to Z.
Example 1 : install to drive C:
A:\> INSTALL C:
Example 2 : install to drive F:
A:\> INSTALL F:
6. NuDAM Administration Utility will be installed in the directory C:\NUDAM