ADLINK ND-6024 - Manual (Page 33)

Command Set • 27
3.4 Read Module Name
@Description
Read module name of NuDAM at specified address.
@Syntax
$(Addr)M<CR>
$ Command leading code.
(Addr) Address ID.
M Read module name.
@Response
!(Addr)(ModuleName) <CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(ModuleName)
NuDAM module‘s name would be ’6021‘.
4 characters
@Example
User command: $18M<CR>
Response: !186021<CR>
! Command is valid.
18 Address ID is 18 (Hex).
6021 ND-6021 (It is a analog output module)