ADLINK ND-6024 - Manual (Page 32)

26 • Command Set
3.3 Read Configuration
@Description
Read the configuration of module on a specified address ID.
@Syntax
$(Addr)2<CR>
$ Command leading code
(Addr) Address ID.
2 Command code for reading configuration
@Response
!(Addr)(OutputRange)(BaudRate)(DataFormat)<CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(OutputRange)
Current setting of analog voltage output, refers
to Table 3-1 for details.
(BaudRate)
Current setting of communication baud rate,
refers to Table 3-2 for details.
(DataFormat)
Current settings of checksum, integration time
and output data format, refers to Figure 3-1 for
details.
@Example
User command: $182<CR>
Response: !18320610<CR>
! Command is valid.
18 Address ID.
32 Analog output range is 0 to 10V
06 Baud rate is 9600 bps.
10
The output data is in engineering units, slew rate is
1mA/sec, checksum is disable.