ADLINK ND-6024 - Manual (Page 34)

28 • Command Set
3.5 Read Firmware Version
@Description
Read firmware version of NuDAM at specified address.
@Syntax
$(Addr)F<CR>
$ Command leading code.
(Addr) Address ID
F Read module firmware version.
@Response
!(Addr)(FirmRev) <CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(FirmRev) NuDAM module‘s firmware version.
@Example
User command: $18F<CR>
Response: !18A2.30<CR>
! Command is valid.
18 Address ID is 18 (Hex).
A2.30 Firmware Version