ADLINK ND-6024 - Manual (Page 50)

44 • Command Set
@Examples
User command: ~060<CR>
Response: !0600$#%@~*<CR>
User command: ~0610A#%@~*<CR>
Response: !06<CR>
User command: A06F
Response: !06A1.8<CR>
Read leading code setting is $#%@~* for module address 06 and change
leading code $ to A, then use A06F to read firmware version of module on
address 06.
*** WARNING ***
• We do not recommend users to change the default setting of leading
code, because it will confuse yourself.
• The leading code change only use the command conflicts other
devices of other brand on the network.
• The changing of leading code is not necessay if all modules in a
network are NuDAMs‘.