ADLINK ND-6024 - Manual (Page 57)

Data Format • 51
4
Data Format
4.1 Unit Conversion
The data value in the command of the analog output module is corresponding
to the amplitude of the physical analog signal. The user should understand the
data format to represent a analog signal by an ASCII string. The physical
meaning of a data depends on both the unit conversion and the value. The unit
conversion of the digits value can be configured by the setting configuration
command. Three types of unit conversion are used in analog output modules.
1. Engineering units.
2. Percent of FSR (Full Scale Range).
3. Hexdecimal.