Subaru 2013 Impreza - Manual (Page 146)

Black plate (148,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
3-28
Instruments and controls
Multi function display
(Non-US vehicles only;
if equipped)
WARNING
. Always pay adequate attention to
safe driving when operating the
multi function display while the
vehicle is in motion. When opera-
tion of the multi-function display
is disturbing your awareness and
ability to concentrate on driving,
stop the vehicle before perform-
ing operations on the screen.
Also, do not concentrate on the
display while driving. Doing so
may cause you to look away from
the road and could result in an
accident.
. Adjust the beep volume so that
you can hear noises in the en-
vironment outside while driving.
If you drive the vehicle without
hearing noises in the environ-
ment outside, an accident may
occur.
Various information will be shown on the
multi function display. Also, a warning
message will appear on the display if a
malfunction is detected. In addition, sev-
eral settings for the displayed content can
be performed.
Multi function display
1)
Outside temperature indicator
2) Information reminder
3) Top display (For the display setting, refer
to “Top display setting” F3-43.)
4) Clock
5) Driving information display (For the dis-
played contents, refer to
“Basic screens”
F3-31.)
Control switch
1)
Up (select)
2) Set (enter)
3) Down (select)
& Basic operation
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the
“ /SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as reminder information, vehicle informa-
tion, warning information, etc., they will