Subaru 2013 Impreza - Manual (Page 167)

Black plate (169,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Bypass screen setting
1. Perform the preparation steps accord-
ing to
“Preparation for screen settings”
F3-43.
2. Operate the “ ” or “ ” switch to
select the “Bypass Screen” item, and then
pull the “ /SET” switch toward you.
3. Select the item to set by operating the
“ ” or “ ” switches, and then pull the “ /
SET
” switch toward you.
4. Select “On” or “Off” by operating the
“ ” or “ ” switch, and pull the “ /SET”
switch toward you.
If you want to change setting for another
item, repeat steps 3 and 4.
5. Select “Set” by operating the “ ” or
Instruments and controls
3-49
– CONTINUED –
3