Subaru 2013 Impreza - Manual (Page 171)

Black plate (173,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
2. Operate the “ ” or “ ” switch to
select the “On/Off” item, and then pull the
“ /SET” switch toward you.
3. The current setting is displayed. Pull
the
“ /SET” switch toward you to enter
the selection mode.
4. Select “On” or “Off” by operating the
“ ” or “ ” switch, and then pull the “ /
SET
” switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the
“ /SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Clear setting
1. Perform the preparation steps accord-
ing to
“Preparation for maintenance set-
tings ” F3-51.
Instruments and controls
3-53
– CONTINUED –
3