Subaru 2013 Impreza - Manual (Page 239)

Black plate (245,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
fire.
NOTE
. iPod ® is a registered trademark of
Apple Inc.
. You are only permitted to personally
copy and play copyright-free material
or material that is legally permitted to
be copied and played by using an
iPod
® and iTunes. Copyright infringe-
ment is prohibited by law.
. To check the firmware version of an
iPod
® , connect it to a computer and
check the device manager. For further
information, see the User
’s Guide for
the iPod ® .
. To update the firmware version of an
iPod
® , visit the Apple Inc. website.
. Depending on the model and firm-
ware version of an iPod
® , it may not
work properly or not operate at all.
& Connecting USB storage de-
vice / iPod ®
WARNING
Do not operate an iPod ® while
driving. Doing so may distract your
attention from driving and could
lead to an accident.
CAUTION
. If the data stored in an iPod ® is
deleted while it is connected to
the in-vehicle system, the data
cannot be recovered.
. Do not store an iPod ® in the
vehicle. If an iPod ® is left in the
vehicle for a long period of time,
it may be deformed, discolored
or damaged by high temperature.
NOTE
. Even if a USB storage device or
iPod
® is connected, it cannot be played
unless the USB/iPod ® mode is se-
lected.
. Movies stored on a USB storage
device or an iPod
® cannot be played
while the storage device or iPod ® is
connected to the system.
. While an iPod ® is connected, the
iPod ® cannot be operated using the
click wheel on the iPod ® (except some
models).
. When using an iPod ® by connecting
it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be different
from that on the iPod
® . However, this
does not indicate a malfunction.
. An iPod ® battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the
“ON”
or “ACC” position. However, activation
of the iPod ® may be delayed if the
battery charge of the iPod ® is low.
. If an iPod ® does not activate after
operation, disconnect the connection
cable from the iPod
® and reset it. For
the resetting procedure, see the User ’s
Guide of the iPod ® .
. If an iPod ® and the connection cable
are connected improperly, the iPod ®
cannot be powered on or will not be
recognized by in-vehicle equipment. In
this case, disconnect the connection
cable from the iPod
® , and then connect
it again.
Audio
5-25
– CONTINUED –
5