Subaru 2013 Impreza User Manual
Page 177
Advertising
Black plate (179,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
4. Select the preferred setting by operat-
ing the
“ ” or “ ” switch, and then pull
the
“ /SET” switch toward you.
5. Select
“Set” by operating the “ ”
switch, and confirm the setting by pulling
the
“ /SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
If the setting is not available, the following
notification will be displayed for approxi-
mately 3 seconds. For more details,
contact a SUBARU dealer.
! Auto light sensor sensitivity setting
1. Perform the preparation steps accord-
ing to
“Preparation for car settings” F3-55.
2. Operate the
“ ” or “ ” switch to
select the
“Auto Light Sensor” item, and
Instruments and controls
3-59
– CONTINUED –
3
Advertising