Subaru 2013 Impreza - Manual (Page 154)

Black plate (156,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
3-36
Instruments and controls
& Date and time settings
The items in the date and time settings
can be set. To change the items, operate
the
“ ” or “ ” switch.
NOTE
. The “Date” item must be set to
display the
“Birthday”, “Anniversary”
and notifications for vehicle mainte-
nance.
. The “Birthday” and “Anniversary”
items can be entered after the
“Date”
item has been set.
! Preparation for date setting
1. Turn the ignition switch to the
“ON”
position and pull the “ /SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the “ ” or “ ” switch to show the
“Date” item. Then, pull the “ /SET” switch
toward you.
! Current date and time setting
1. Perform the preparation steps accord-
ing to
“Preparation for date setting” F3-
36.
2. Operate the “ ” or “ ” switch to
select the “Date” item, and then pull the
“ /SET” switch toward you.
3. Select the item to set by operating the
“ ” or “ ” switch, and then pull the “ /
SET
” switch toward you.
4. Select a number by operating the “ ”
or “ ” switch, and then pull the “ /SET”
switch toward you.