Subaru 2013 Impreza - Manual (Page 179)

Black plate (181,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
2. After the selection screen is displayed,
operate the
“ ” or “ ” switch to show the
“Initialize” item. Then, pull the “ /SET”
switch toward you.
! Reset to factory default settings
1. Perform the preparation steps accord-
ing to
“Preparation for initialization” F3-
60.
2. Operate the “ ” or “ ” switch to
select the “Reset to Defaults” item, and
then pull the “ /SET” switch toward you.
3. The system displays “No” first. To
return to the factory default settings, select
“Yes” by operating the “ ” switch.
4. Confirm the setting by pulling the “ /
SET ” switch toward you.
5. The system will notify you that the
setting is complete for approximately 3
seconds.
Instruments and controls
3-61
– CONTINUED –
3