Subaru 2013 Impreza - Manual (Page 172)

Black plate (174,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
3-54
Instruments and controls
2. Operate the “ ” or “ ” switch to
select the “Clear All Settings” item, and
then pull the “ /SET” switch toward you.
3. The system displays “No” first. To clear
all maintenance settings, select “Yes” by
operating the “ ” switch.
4. Confirm the setting by pulling the “ /
SET ” switch toward you.
5. The system will notify you that the
setting is complete for approximately 3
seconds.
& Driving history registration
The items in the driving history can be
registered. To change the items, operate
the
“ ” or “ ” switch, and then pull the
“ /SET” switch toward you.
1. Turn the ignition switch to the “ON”
position, and then pull the “ /SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the
“ ” or “ ” switch to show the
“Driving History” item. Then, pull the “ /
SET
” switch toward you.