Subaru 2013 Impreza - Manual (Page 173)

Black plate (175,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
3. Pull the “ /SET” switch toward you
once more to enter the setting mode.
4. The system will notify you of the place
to be selected for approximately 2 sec-
onds.
5. Select one of the registration lines by
operating the
“ ” or “ ” switch, and then
pull the “ /SET” switch toward you.
6. To overwrite the previous registration,
pull the
“ /SET” switch toward you. When
registration is performed the first time, it is
registered directly without a notification.
7. The system will notify you that the
registration is complete for approximately
2 seconds.
NOTE
The driving history can be registered
for the trip meter A or B.
& Car settings
The items in the car settings can be set.
To change the items, operate the
“ ” or
“ ” switch, and then pull the “ /SET”
switch toward you.
! Preparation for car settings
1. Turn the ignition switch to the
“ON”
position, and then pull the “ /SET” switch
Instruments and controls
3-55
– CONTINUED –
3