Subaru 2013 Impreza User Manual
Page 161
![background image](/files/763981/content/doc161.png)
Black plate (163,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
4. Select an item by operating the
“ ” or
“ ” switch, and then pull the “ /SET”
switch toward you.
5. Select
“Set” by operating the “ ”
switch, and confirm the setting by pulling
the
“ /SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
& Screen settings
The items in the screen settings can be
set. To change the items, operate the
“ ”
or
“ ” switch, and then pull the “ /SET”
switch toward you.
! Preparation for screen settings
1. Turn the ignition switch to the
“ON”
position and pull the
“ /SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the
“ ” or “ ” switch to show the
“Screen Setting” item. Then, pull the “ /
SET
” switch toward you.
! Top display setting
1. Perform the preparation steps accord-
ing to
“Preparation for screen settings”
F3-43.
Instruments and controls
3-43
– CONTINUED –
3