Subaru 2013 Impreza - Manual (Page 182)

Black plate (184,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
3-64
Instruments and controls
“ ” position: auto on/off headlights (if
equipped)
When the ignition switch is in the
“ON”
position, the instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
“ ” position
The headlights are all off.
NOTE
The sensitivity of the auto on/off head-
lights can be changed by a SUBARU
dealer. Consult your SUBARU dealer
for details. Also, for models with a multi
function display, the setting can be
changed using the display. For details,
refer to
“Multi function display (Non-US
vehicles only; if equipped) ” F3-28.
! Sensor for the auto on/off head-
lights (if equipped)
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/low beam change
(dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light
“ ” on the combina-
tion meter is also on.
To switch back to low beam, pull the lever
back to the center position.