KBC Networks H.264 Encoder - Manual (Page 25)

Encoder User Manual
Manual-H264_ENC-Rev1207A
Copyright © KBC Networks 2012
Page 25 of 49 www.kbcnetworks.com
3.3.11 Network: Speed & Duplex
If a certain speed and duplex setting is required other than auto-detect, it can be
selected in this section. Other options include:
• 100 Mbps / Full Duplex
• 100 Mbps / Half Duplex
• 10 Mbps / Full Duplex
• 10 Mbps / Half Duplex
Note: Click on “Apply” in this section of the web browser GUI to apply changes to
the media speed setting.
3.3.12 IP Settings: Connection Type
The WAN Setting is where the network properties of the encoder are configured.
Keep a record of changes or use the IP Utility to find the IP addresses if changed
from default configurations.