7 instruction of disassembly – KBC Networks H.264 Encoder User Manual
Page 47
Advertising
Encoder User Manual
Manual-H264_ENC-Rev1207A
Copyright © KBC Networks 2012
Page 47 of 49
www.kbcnetworks.com
7 Instruction of Disassembly
Instruction of Disassembly of KBC Product
(For EU Directive 2002/95/EEC-WEEE)
Tools required:
•
No. 1 Phillips screwdriver
Steps for disassembly:
1. Remove screws from front face of encoder.
2. Slide out top lid
3. Remove screws from back end face of encoder.
4. Slide out printed circuit board (PCB).
Notice: When a product reaches the end of its life – return to KBC.
Advertising