KBC Networks H.264 Encoder - Manual (Page 46)

Encoder User Manual
Manual-H264_ENC-Rev1207A
Copyright © KBC Networks 2012
Page 46 of 49 www.kbcnetworks.com
6 Safety, Approvals and Regulatory Domain
Information
6.1 Safety Instruction
For your protection, please read and observe all safety instructions before operating
this system and keep this sheet and any additional instructions for future reference.
6.1.1 Installation and Use
OBSERVE WARNINGS: All warnings in the operating instructions should be carefully
followed. Do not make any modifications to the encoder unit, power supply, or any
other KBC Networks electronic device, as the unit(s) will no longer comply with legal
regulations and therefore void its warranty.
WATER AND MOISTURE: The encoder is not weatherproof and must be mounted
indoors or in an outdoor protective enclosure.
POWER SOURCE: Connect the equipment to a power source only of the type
described on the operating instructions or as marked on the equipment. Excessive or
insufficient current or voltage can cause extended trouble-shooting or even damage
that could negate its warranty.
ATTACHMENTS: Use only KBC Networks’ supplied or recommended Power Supplies,
Power Injection Modules (when connecting to a KBC WESII or other KBC wireless
system), Cat5 Cables and weather seals (where applicable) and plugs.
WHEN NOT IN USE: Unplug the power if the equipment is left unattended or
unused for long periods of time or during lightning storms (if outdoors).
REPLACEMENT PARTS: When replacement parts are required, use only replacement
parts specified by KBC Networks. Unauthorized substitutions may result in damage to
the system and could void the warranty.
6.2 Regulatory Certifications
The KBC encoder is certified by FCC, IC, CE
6.2.1 FCC Part 15 Required Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.