Introduction – XTA DC1048 User Manual

Page 10

Advertising
background image

Page 10

DC1048 Integrated Audio Management

Operator’s Manual

Introduction

Your DC1048 is a 4 input, 8 output audio processor, offering a selection of flexible
features to configure and manage an installation audio system. These include
matrix mixing of all inputs to outputs, input equalisation, output equalisation,
output (speaker) crossovers, delays and speaker protection (limiters).

Input signal path:

Output signal path:

Each of the 4 inputs enters the mixing matrix and
is routed to any of the 8 outputs as required
through the adjustment of the relative levels:

Computer and network connections for remote
control are catered for through a front panel USB
socket and an RS485 multi-drop bus connector on
the rear panel.

The simple user interface on the unit helps quickly
set up the various basic comms options to facilitate
connection to a computer for full, secure access to
all the features and easy programming through
ICORE, the software package designed for use
with this and many more products.


Configurations can be saved within the unit for recall as required, either directly
from the front panel, or via the computer. A real time clock is also built into the
device so automated recalls at specific times/days can be set-up for complete set-
and-forget operation.

A GPIO port allows simple remote preset recall, as well as connection to the
WP-1048 touch remote wall panel.

Advertising