XTA DC1048 - Manual (Page 39)

Operator’s Manual DC1048 Integrated Audio Management Page 39
The rules governing the security system are:
- Security is GLOBAL across the network and not specific to a particular unit.
- Adding a device to the system once security is in place will cause it to
become part of the secure system and it will receive all security info when
the system goes on-line.
- Adding a device from a secure system to an open system (without security)
will trigger a request for the password to be entered as used on the secure
system. Once entered, security may then be disabled and this will be
reflected on the previously secure unit so it won’t request a password next
time the system goes on-line. Failure to enter the correct password for a
device will result in it being ignored when the system is on-line.
- Up to nine user levels can be added.
- Security information is stored in the ICORE file as well as the units, so
usernames and passwords will be compared in case a different secure system
is opened compared to the file open on the computer when going on-line.